If you are looking a guide about installing curtain room dividers then you should keep reading.
Complaints regarding inadequate space for privacy are often given out by people who are living in small-spaced apartments. Some resolve on constructing walls to divide the rooms; nonetheless, this solution is not always possible. Among the temporary ways to divide rooms is through the use of room dividers.
Curtain Room Dividers
There are various kinds of room dividers accessible out there such as folding screens, or those made from wood, etc. These room dividers are a really option, yet they cost much.
Hence, a good option you can do is the usage of curtain room dividers to divide a room into two; however, this is possible for permanent basis only.
You can use curtain room dividers in many different functions at home.
If for instance you have a huge living room attached to your kitchen or dining room, placing a curtain will be great in order to have privacy in the living room.
The type of curtain room dividers you are going to use for the division of the room is the first and foremost thing you have to consider.
Curtains in thick fabrics are good in providing every side of the room their own privacy. You may also opt to use curtains in thin fabrics such as those made of beads.
Make sure that the curtains won’t appear inappropriate. The hanging curtain room dividers are the finest kind of divider.
You have the choice of sliding or pulling the curtain up when partition is not needed. That is why these dividers are also called sliding space dividers.
Installation of Curtain Room Dividers
After you have decided which curtain will fit into your room, it is time to install them.
The installation process of a space divider is fairly quick. The materials that you will require for the installation include closet dowel rod, rod holders, screw guns and the drapes. When placing the drapes up, you may also opt to ask help.
Begin by measuring the area where you’ll place the curtain. This should comprise of the height and width of the area. Then you will purchase and sew the drapes accordingly. Remember to allot three to four inches of space for the dowel rods.
After doing this, indicate a pencil mark on the area where the rods will be placed.
Place the marks on both sides of the wall; assure that both the marks match one another. Tighten up the screw over the closet dowel using a screw gun. Secure it in the area where you marked the measurements. Subsequently, measure the inner dimensions of the rod holders. Then, using a hand saw cut the dowel rod for it to perfectly fit in the holder.
Nevertheless, do not tighten it too much. Lastly, hang your selected curtains on the dowel rod and put the ends of the rod to the rod holder; that is how the installation of curtain room dividers ends.